Panel Filters
Panel filters are used in industries to retain particles ranging from 1 micron to 50 microns. These filters are basically air intake filters, which is working with the negative pressure of systems. These filters are further classified as:
- Primary Filters
- Secondary Filters
Primary filters are used for coarse filtration for the removal of particles in a range of 10 to 50 microns. Primary filters retain coarse particles to avoid further loading on secondary filters & enhance the life of the secondary filters. Primary filters are cleanable in nature to obtain good shelf life.
Features
- Low pressure drop due to pleated configuration.
- Easy to install.
- No bypassing.
- Washable & reusable.
- High dirt holding capacity.
- Good mechanical strength.
- Retrofit to any standard make.
Configuration
- Flange type & Box type
Sizes available
- 610 mm x 610 mm x 50 mm / 100 mm / 150 mm / 300 mm
- 545 mm x 545 mm x 50 mm / 100 mm / 150 mm / 300 mm
- Customized sizes are available on request
Filtration Rating
- 10, 15 , 20, 25 micron & more
Filtration efficiency
- 80 – 90 %
Frame Material
- SS 304 / GI (Galvanized Steel) / Aluminum Powder coated / CRC powder coated or Zinc coated
Filter media
- HDPE Media / Synthetic Fiber Media / Spun bonded polyester media
Secondary filters are used for fine filtration for removal of particles in the range of 1 to 10 microns. Secondary filters are made from selective fiber media for better efficiency.
Features
- Low pressure drop due to pleated configuration.
- Easy to install.
- No bypassing.
- Washable & reusable.
- High dirt holding capacity.
- Good mechanical strength.
- Retrofit to any standard make.