Higher quality materials and equipment can lead to higher profits

PTFE (Poly Tetra Fluoro Ethylene) Filter Cartridge

PTFE (Poly Tetra Fluoro Ethylene) Filter Cartridge

PTFE Cartridges are made up of polytetrafluoroethylene. PTFE is characterized by high chemical inertness. These are specifically designed for sterile filtration applications of liquid, air & gas streams. They are certified, bio-safe, non-pyrogenic & fully validated to pharmaceutical standards. PTFE and polypropylene, the unique two materials used in cartridge manufacturing are chemically inert, not shedding and biologically safe according to F.D.A., USP and EEC requirements for pharmaceutical and food contact usages. PTFE cartridge membrane is used in filtering highly corrosive solutions such as strong acids, base solutions, and solvents. The membrane has about 80 – 95 % porosity & uniform pore size distribution. Moreover, the filtration area of each cartridge is as high as 0.7 m2. Therefore, it offers a high flow rate, low-pressure drop & long service life. These can be steam-sterilized directly or reverse as per standardized operating data.

  • PTFE membrane has excellent chemical resistance.
  • End caps and connectors are sealed by thermal bond, free from a binder.
  • low-pressure drop and high flow rate due to high filtration area of 0.7 m2 Per 10” cartridge.
  • Inherently hydrophobic expanded PTFE microporous membrane for broad chemical compatibility & to prevent moisture obstruction in venting & wet air filtration.
  • Absolute rated & precisely controlled pore size distribution for superior & constant bacterial retention.
  • Autoclave or in situ steam sterilization features.
  • an integrity test is possible.
  • FDA approved.
Sizes 10”, 20”,30”40” Long
Micron Rating 0.05, 0.1, 0.2, 0.45 , 1 Micron
Filtration Area More Than 0.7 m2 Per 10” cartridge
Outer Diameter 69 mm
Inner Diameter 28 mm
  • Double Open Type (DOE Type)
  • Code 7S (226 O’ Ring Design / Bayonet)
  • Code 7F (226 O’ Ring Design / Flat)
  • Code 3S (222 O’ Ring Design / Bayonet)
  • Code 3F (222 O’ Ring Design / Flat)
Filter Media 100 % PTFE (Poly Tetrafluroethylene) Membrane
Support Media Polypropylene fiber
Inner Core High strength polypropylene
Outer Core High strength polypropylene
End Caps High strength polypropylene
O Ring / Gaskets EPDM / Buna N / Silicone / Viton
Pharmaceuticals
Sterilization of inlet & exhaust flow
Vent filter
Gas purification (like nitrogen & others)
Compressed air (sterile grade)
Acid / Solvents & base filtration
Wet etching process

 

Electronics Industries
Semi conductors
CD- R & DVD – R factory
Fine filtration of DI water
Photoelectron chemical filtration

IFPLPTE68-0.2-10 -E

IFPL PTE Diameter of cartridge Micron Rating Length Of Cartridge Configuration
  Poly Tetra Fluoro Ethylene 68 MM 0.2 Micron 10″ Length A – 226 O’ Ring With Bayonet Design
      0.45 Micron 20″ Length B – 226 O’ Ring With Flat Design
        30″ Length C – 222 O’ Ring With Bayonet Design
         40″ Length D – 222 O’ Ring With Flat Design
          E – DOE Type