Higher quality materials and equipment can lead to higher profits

Spun Bonded Filter Cartridges

Spun Bonded Filter Cartridges

Spun Bonded Filter Cartridges are made up of 100% polypropylene fibers. The fibers have been carefully spunned together to form a true gradient density from the outer to the inner surface. Filter cartridges are available with both core & without core versions. The superior structure remains integral even under severe operating conditions and there is no media migration. Polypropylene fibers are blown continuously on the central molded core, without any binders, resins or lubricants.

Operation

Unfiltered fluid passes through a depth filter matrix and enables the progressive retention of finer particles, which provides higher efficiency, better dirt retention & longer filter life. The fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of the cartridge.

  • Free of surfactants, binders and adhesives.
  • Excellent flow with low pressure drop.
  • High dirt holding capacity.
  • 100 % Polypropylene for wide chemical compatibility.
  • High strength & pressure resistance.
  • One piece construction up to 1016 mm & more.
  • Nominal & absolute filtration rating.
  • NSF42 and FDA CFR title 21 Certified cartridges are available.
  • All housings made from SS 316 L, SS 316 & SS304 are mirror polished & electro polished to resist adhesion of dirt and scale.
  • Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel.
  • ASME code stamp available.
  • Duplex / Triplex / Jacketed cartridge filter unit designs are available.
  • High temperature & high pressure design are available.
Sizes 10”, 20”, 30”, 40”, 50”, 60” Long
Micron Rating 1, 5, 10, 25, 50, 75, 100
Outer Diameter 64 mm (2.5”), 114mm (4.5”), (150 mm) 6”, 8”
Inner Diameter 25mm, 28 mm, 48 mm
  • Double Open Type (DOE Type)
  • Code 7S (226 O’ Ring Design / Bayonet)
  • Code 7F (226 O’ Ring Design / Flat)
  • Code 3S (222 O’ Ring Design / Bayonet)
  • Code 3F (222 O’ Ring Design / Flat)

Spun bonded filter cartridges are made up of 100 % poly proplyne.

Food & Beverages  Bottled water, Flavors, Polishing Lines
Pharmaceuticals  Base product clarifications, Membrane prefilter
Fine Chemicals  Solvents, Process Streams, Water Purification
Magnetic coating  Dispersions, Coating Lines, Solvents
Petrochemicals  Water flood, Comletion Fluids, Amines
Cosmetics  Alcohols, Essential oils , Water lines
Water Treatment  Membrane Protection, Resin Trap
Metal Finishing  Plating solution, paint and resin products, Wash
Electronics  Electroplating, Etching, Image development