Stainless Steel Filter Cartridges
Stainless steel cartridges are designed to overcome the temperature and chemical compatibility limitations of fabric or synthetic fiber media. This will offer very high-temperature resistance & can even withstand high differential pressure. Stainless steel cartridges are offered in SS 304, SS 316, & SS 316 L materials. These elements can be either plain cylindrical or in pleated configuration to increase filtration area. Usually, all stainless steel pleated & cylindrical filters are supported with coarser filter media to ensure no direct damage is inflicted to the main filtering media under process upsets. A bubble point test can be done to certify that no opening larger than the specified pore size exists in product joints or seams. No media migration occurs due to stainless steel material. These elements can be back washed & reused.
Type Of Filters
Stainless steel wire mesh type
Stainless steel sintered metal powder type
Stainless steel random fiber / sintered metal fiber type
Stainless steel multi-layered wiremesh
Type Of Filter Design
Plain cylindrical design
Pleated configuration design
Welded design
- Stable pore shapes.
- High permeability.
- Low pressure drop.
- High dirt-holding capacity (longer lifetime).
- High temperature resistance.
- High differential pressure, with stand capacity.
- Strong corrosion resistant.
- Back flushing.
- Excellent mechanical strength.
- No media migration.
- Customized Sizes available.
The composite fiber material is sintered together with a wire mesh under vacuum conditions and rolled to form mats of a specific thickness. Stainless steel cartridges can be wrought into tubes, cartridges or disks, plain, pleated or according to customer requests
| Sizes | 10”, 20”, 30”, 40” Long (Customized sizes available) |
| Micron Rating | 0.2, 0.5, 1, 3,5,10, 20, 25, 50 & More |
| Standard Outside Diameter | 64 mm |
| Inner Diameter | 28 mm |
- Double Open Type (DOE Type)
- Code 7S (226 O’ Ring Design / Bayonet)
- Code 7F (226 O’ Ring Design / Flat)
- Code 3S (222 O’ Ring Design / Bayonet)
- Code 3F (222 O’ Ring Design / Flat)
- 1” NPT / BSP Connection
| Catalyst Recovery In Petrochemical / Chemical Industries |
| Polymer Filtration |
| Cross Flow Filtration |
| Gas Filtration |
| Analytical Devices |
| Medical devices |
| Oil Filtration |
| Aerosol Application |
| Gas – Liquid Separation |
| Hot Gas Filtration |
| Fuel & Hydraulic Oil Filtration |
| R.O. Pre Filtration |
IFPLSS31664-WPW-002-10 -E
| IFPL | Material | Diameter | Construction | Micron Rating | Length | Configuration |
|---|---|---|---|---|---|---|
| SS 304 | 64 MM | WWW – Wire Mesh Wrap Round Welded | 0.1 Micron | 10″ Length | A – 226 O’ Ring With Bayonet Design | |
| SS 316 | 110 MM | WWA – Wire Mesh Wrap Round Adhesive | 0.2 Micron | 20″ Length | B – 226 O’ Ring With Flat Design | |
| WPW – Wire Mesh Pleated Welded | 0.5 Micron | 30″ Length | C – 222 O’ Ring With Bayonet Design | |||
| WPA – Wire Mesh Pleated Adhesive | 001 Micron | 40″ Length | D – 222 O’ Ring With Flat Design | |||
| SMP – Sintered Metal Powered | 003 Micron | E – DOE Type | ||||
| 005 Micron | ||||||
| 010 Micron | ||||||
| 020 Micron | ||||||
| 025 Micron | ||||||
| 050 Micron | ||||||
| 100 Micron | ||||||
| 200 Micron |