Wound Filter Cartridges are designed to meet the most demanding filtration duties. They offer an economic, compact, easily installed and maintained filtration system for the removals of particles from liquid. Wound cartridges are manufactured from a variety of carefully selected raw materials. These are processed into fibers of specific grades using the latest technology. After carding & spinning into roving they are wound into cartridges with cautiously controlled micron ratings. From raw materials to finished products we are in control of the quality and filtration characteristics. They are appreciated due to their high dirt-holding capacity and rugged construction that allows facing different applications in liquid and gas filtration.
Unfiltered fluid passes through a depth filter matrix, which enables the progressive retention of finer particles, providing higher efficiency, better dirt retention & long filter life. The fluid flows from outside to inside through filter media. Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of the cartridge.
| Sizes | 10”, 20”, 30”, 40”, 50”, 60” Long |
| Micron Rating | 1, 5, 10, 25, 50, 75, 100 |
| Outer Diameter | 64 mm(2.5”) 100 mm(4”), 110mm(4.5”) 6”, 8” |
| Inner Diameter | 28mm |
Double Open Type (DOE Type), 226 O’Ring design & 222 O’Ring Design
| Polypropylene wound filter cartridge |
|---|
| Organic Acids |
| Oils |
| Concentrated Alkalis |
| Water |
| Organic solvents |
| Electroplating solution |
| Photographical process fluid |